MADAS Gas Safety and Regulation Devices

DN15 to DN100

• Maximum Working Pressure : Upto 5 Bar
• End Connections – Flanged as per ISO7005(PN16)
•  or Threaded
• Outlet Pressure Range : Settable between 9 to 600mBar depending on spring.
• Body :  Die Cast Aluminum
• Suitable for Natural Gas, LPG, Propane and other non aggressive gases of the 3 families.
• Special versions available for Bio-gas, Producer Gas etc.

DN15 to DN300

• Maximum Working Pressure : 360mBar, 1 Bar or 6 Bar versions available
• End Connections – Flanged as per ISO7005(PN16)
•  or Threaded
• Action : Normally Closed
• Coil Voltages : 24 Vdc or 24/110/230 VAC 50/60 Hz.
• Coil Protection : IP-65
• Body :  Die Cast Aluminum
• Also Available with
• Closed Position Indication switch
• Fast Closing and Slow Opening action
• Flow Regulator
• Suitable for Natural Gas, LPG, Propane and other non aggressive gases of the 3 families.
• Special versions available for Bio-gas, Producer Gas etc.

DN15 to DN300

• Maximum Working Pressure : 500mBar or 6 Bar versions available
• End Connections – Flanged as per ISO7005(PN16)
•  or Threaded
• Action : Normally Closed Manual Reset
• Coil Voltages : 24 Vdc or 24/110/230 VAC 50/60 Hz.
• Coil Protection : IP-65
• Body :  Die Cast Aluminum
• Suitable for Natural Gas, LPG, Propane and other non aggressive gases of the 3 families.
• Also Available with Closed Position Indication Switch
• Special versions available for Bio-gas, Producer Gas etc.

DN20 to DN150

• Used for Over pressure protection. Shuts off automatically if the regulated pressure goes beyond safe value. Can be reset manually and opened only after verifying and rectifying the cause that triggered the shutoff
• Maximum Working Pressure : 1Bar or 6 Bar versions available
• Suitable for Natural Gas, LPG, Propane and other non aggressive gases of the 3 families.
• Closing time : Less than 1 sec.

DN8-DN50

• Suitable for Natural Gas, LPG, Propane and other non aggressive gases of the 3 families
• Max working Pressure – 1 Bar, 2.5 Bar or 6 Bar versions available.
• End Connections :  Threaded as per EN-10226
• Body – Die Cast Aluminum

DN20-DN50

• Maximum Working Pressure : 360mBar
• End Connections – Threaded as per EN-10226
• Action : Normally Open Auto Reset
• Coil Voltages : 24 Vdc or 24/110/230 VAC 50/60 Hz.
• Coil Protection : IP-65
• Body :  Die Cast Aluminum
• Suitable for Natural Gas, LPG, Propane and other non aggressive gases of the 3 families.
• Also Available with Closed Position Indication Switch
• Special versions available for Bio-gas, Producer Gas etc.

The wide assortment of AG/RC Air Gas Ratio Regulators supplied by us are fabricated from the best grades of raw materials and are high in performance and low in maintenance. They are designed to perfection with the aid of efficient designers and engineers. Moreover they are corrosion resistant and durable and are available in market leading prices.

Specifications:

• DN15 to DN100
• Maintain a constant Air: Gas ratio settable between 1:1 to 10:1
• Maximum Working Pressure : 500mBar
• End Connections – Flanged as per ISO7005(PN16)
•  or Threaded as per EN-10226
• Available in regular and compact versions

Suitable for Natural Gas, LPG, Propane, Air etc.

 

• Pressure Range : 1-10mBar, 2.5 to 50 mBar, 5-150mBar, 100-500mBar

DN10 to DN50

• Suitable for Light Oils
• End Connections : Threaded as per ISO228/1
• Coil Voltages : 24Vdc or 24/110/230VAC
• Coil Protection : IP65
• Maximum working Pressure : 4 Bar/8Bar
• Body : Forged Brass / Die Cast Aluminum

• ¼”, 3/8” , ½”
• End connections : Threaded NPT(F)
• Action : Push to Test.
• Used for isolation of Pressure Gauges.  Push type knob provided which connects the pressure gauge only when Pressure is to be tested.